Skip to content
Coreline Engineering

Commercial buildings

Commercial buildings are designed around lettable floor area, column-free space and a construction programme that a builder can price with confidence. Coreline provides structural design and documentation for offices, showrooms, public buildings and refurbishments across Greater Brisbane and regional Queensland.

Sector

Projects in this sector

  • Commercial buildings
  • Public buildings
  • Office fit-outs with structural change
  • Showrooms and service buildings

What clients in this sector worry about

Floor area and planning flexibility
Owners want spans that suit several tenancy layouts over the life of the building. Column grids, transfer structures and slab depth all trade against each other, and the decision is cheapest at concept stage.
A price the builder can hold
Tender documents that leave connections, penetrations or temporary works undefined turn into variations. Developers need structural drawings coordinated with the architecture and services before the contract is let.
Approval and certification
A building certifier needs structural design certified by an RPEQ before issuing a building approval. Late changes to loads or layouts can mean redesign and re-certification.
Change of use in existing buildings
Converting a warehouse to offices, or adding a mezzanine or plant deck, changes imposed loads. The existing structure has to be checked against the new use before fit-out starts.

Engineering considerations

Structural system selection
Post-tensioned or reinforced concrete flat plates, composite steel floors and precast systems each suit different spans, floor-to-floor heights and site access. The right choice depends on programme, crane access and the services strategy as much as on tonnage.
Imposed actions and future use
Design floor loads follow AS/NZS 1170.1 for the intended occupancy. Allowing for compactus storage, plant or a future change of use at design stage costs far less than strengthening later.
Services coordination
Penetrations through beams and slabs, set-downs for wet areas and plant loads on the roof need to be fixed with the services engineers before structural documentation is issued.
Wind and lateral stability
Lateral load paths through cores, frames or bracing are set early because they drive the floor plate. Wind actions are assessed under AS/NZS 1170.2 for the site's terrain and exposure.
Building near sewers and easements
Many commercial sites in South East Queensland have water or sewer mains crossing them. Footings within the distances set by QDC MP 1.4 need an assessment, and sometimes a referral to the service provider.

Questions we are asked

When should a structural engineer join a commercial project?

At concept design, before the column grid and floor-to-floor heights are fixed. Early input lets the architect and quantity surveyor compare framing options while changes are still cheap.

Can an existing office floor take compactus storage or new plant?

Sometimes, but it has to be checked. An engineer compares the new loads with the original design capacity, using drawings where they exist and site measurement where they do not, and specifies strengthening if needed.

Who certifies structural design for a building approval in Queensland?

Professional engineering services in or for Queensland must be carried out by, or under the direct supervision of, a practising Registered Professional Engineer of Queensland (RPEQ). The certifier relies on that certification when issuing the building approval.

Sources

Have a project that needs engineering input?

Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.

Registered engineer
Mustafa Koc, RPEQ 35981 (Civil)
Add company, role and timing (optional)

We use these details only to respond to your enquiry. See our privacy policy. Please do not attach or paste plans here; we will ask for them by email once we have spoken.

Call 1300 924 666Discuss your project