Skip to content
Coreline Engineering

Housing engineering

Coreline engineers single houses, extensions, duplexes, unit sites and small subdivisions: footings and slabs, the structure of roofs, walls and floors, retaining walls, stormwater and drainage plans, and stage inspections. We design to the site classification in your soil report and tell you early if the site needs more testing.

5 services

On a house, the footing system is chosen by the soil. A highly reactive clay site in Logan, a filled lot in a new estate and a sloping block on rock each call for a different slab and footing, and the cost difference between them can be larger than any saving made elsewhere in the structure. We start from the soil report and the site survey, then design the slab, the retaining and the drainage together, because surface water that ponds against a slab edge undoes a good footing design.

For renovations and architect-designed houses we design the framing, beams, posts, bracing and connections that sit outside the scope of the timber framing code, and we check what an extension or a removed wall does to the existing structure. Builders get drawings and certification the certifier can process without a round of questions.

We also inspect footings, reinforcement and framing during construction, and inspect existing houses when cracking, movement or a defect dispute needs an engineer's opinion.

Housing engineering services

Also within this discipline

Work we take on as part of a wider engagement. Ask us if your project needs it.

  • Engineering for small subdivisions, re-subdivided lots, unit sites and retirement villages
  • Coordination with surveyors, geotechnical firms and building certifiers so approval documents line up

Questions we are asked

What is a site classification and why does my footing design depend on it?

A site classification describes how much the ground is expected to move as its moisture changes, from stable sand and rock to highly reactive clay, along with problem sites such as uncontrolled fill. AS 2870 uses the classification to set the type and stiffness of the slab and footings, so the classification in your soil report drives the design and much of the slab cost.

Do you do the soil test?

We do not carry out the soil testing ourselves. We tell you what testing the site needs, review the report once it arrives, and design the footings and slab to its classification. If the report leaves questions, for example about fill depth or rock, we say so before the design is issued.

Do I need an engineer to remove a wall in my house?

If the wall is load bearing, or carries bracing for the house, yes. The engineer works out what the wall supports, sizes the beam and posts that replace it, and checks that the loads reach a footing that can take them. A non-structural partition can usually come out without engineering, but that has to be confirmed first.

When does a retaining wall need engineering in Queensland?

Retaining walls over 1 metre high, and walls of any height that carry a surcharge such as a driveway, building or another wall within the zone behind them, generally need building approval and an engineered design. Check with your certifier or council, because the trigger depends on the wall's height, location and what sits above it.

Have a project that needs engineering input?

Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.

Registered engineer
Mustafa Koc, RPEQ 35981 (Civil)
Add company, role and timing (optional)

We use these details only to respond to your enquiry. See our privacy policy. Please do not attach or paste plans here; we will ask for them by email once we have spoken.

Call 1300 924 666Discuss your project