Structural assessments and audits
We inspect and report on existing structures: condition audits, assessments before a purchase or change of use, investigation of cracking and movement, and checks that installed materials and products meet the specification. Reports set out what was found, what it means for safety and use, and what to fix in what order.
Structural engineering
Typical projects
- Condition audits of commercial and industrial buildings
- Assessment before a change of use or added load
- Investigation of cracking, movement or corrosion
- Materials and product compliance checks during construction
- Defect reports for owners, bodies corporate and builders
- Periodic inspections of asset portfolios
Problems this work solves
- Symptoms with several causes
- A crack can come from foundation movement, shrinkage, overload or corrosion. Treating the wrong cause wastes money and the crack returns.
- Missing records
- Older buildings often have no drawings. Capacity has to be established from measurement, testing and judgement before any change is approved.
- Non-conforming products
- Substituted materials and products that do not meet the specification can compromise a structure. Compliance has to be checked against documents and, where needed, testing.
What our engineering covers
Coreline's role is design, documentation, assessment and inspection. Construction, supply and installation sit with the builder and trades.
- Visual inspection and measurement of structural elements
- Review of available drawings, certificates and product documentation
- Coordination of testing, such as concrete cores, cover surveys or soil testing, by specialist laboratories
- Assessment of capacity for existing or proposed loads
- Written report with findings, risk rating and recommended actions
- Remedial design and documentation where engaged
Design considerations
- Scope set by the question
- A pre-purchase walk-through, a change-of-use capacity check and a dispute report need very different depth. Agreeing the question first keeps the fee proportionate.
- Monitoring before repair
- For some cracking, a period of crack monitoring tells you whether movement is ongoing before money is spent on repairs.
- Priority of actions
- Reports separate items that affect safety from maintenance items, so owners can budget and programme the work.
What you typically receive
The exact deliverables are set in the fee proposal for each project.
- Inspection report with photographs and marked-up plans
- Findings rated by urgency and consequence
- Recommended remedial actions
- Remedial drawings and specifications where engaged
What to send us
- The question you need answered and who the report is for
- Any existing drawings, certificates or previous reports
- History of the problem, including when cracking or movement was first seen
- Access arrangements, including roof spaces and subfloors
- Planned changes of use or loads, if any
Standards and regulations that usually apply
Which documents govern a design depends on the project. These are the ones most often relevant here; we confirm the applicable editions for each job.
- AS/NZS 1170 series
- Structural design actions: permanent, imposed, wind, earthquake and other loads used in every structural design.
- NCC (Building Code of Australia)
- Performance requirements for buildings. In Queensland NCC 2022 applies until 30 April 2027 and NCC 2025 from 1 May 2027.
Questions we are asked
What does a structural audit of a commercial building include?
A structural audit records the condition of the frame, floors, roof structure, walls and foundations as far as they can be seen, identifies defects and their likely cause, and rates them by urgency. It can also confirm capacity for a planned change of use or added load.
Should I worry about a crack in a concrete slab?
Fine shrinkage cracks are common and rarely structural. Cracks that are wide, growing, stepped across levels, or accompanied by doors sticking or floors moving should be inspected, because they can indicate foundation movement or overload.
Can you check whether materials on site meet the specification?
Yes. We check delivered products and installed work against the specification and supplier documentation, and arrange testing through accredited laboratories where documents alone cannot settle it.
Need structural assessments and audits?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
