Pool leak investigation
We investigate pools that lose water, working out whether the leak is in the shell, the joints, the fittings or the pipework, and design a repair that addresses the cause. The investigation also checks whether escaping water has affected the ground or nearby structures.
Aquatic engineering
Typical projects
- Residential pools losing water
- Commercial pools with unexplained water use
- Pools with cracking or movement
- Pools near houses where leakage may affect footings
Problems this work solves
- Evaporation or leak
- Evaporation in a hot Queensland summer can be significant. The first step is establishing whether losses are beyond what evaporation explains.
- Several possible sources
- Skimmer joints, light niches, return fittings, pipework and cracks all leak. Pressure testing and inspection are needed to isolate the source.
- Leaks that move ground
- Water escaping into reactive clay can cause swelling and movement under the pool or nearby footings, making the problem structural.
What our engineering covers
Coreline's role is design, documentation, assessment and inspection. Construction, supply and installation sit with the builder and trades.
- Review of history, water loss records and evaporation
- Inspection of the shell, fittings and joints
- Coordination of pressure testing or dye testing by specialists
- Assessment of cracking and ground conditions
- Remedial design for the shell, joints or pipework
- Inspection of the completed repair
Design considerations
- Fix the cause
- Sealing a crack without addressing the movement that caused it leads to the crack reopening.
- Nearby structures
- Where leakage has wetted the ground near the house, its footings may need inspection.
- Records
- A few weeks of water level readings with the pump on and off help separate pipework leaks from shell leaks.
What you typically receive
The exact deliverables are set in the fee proposal for each project.
- Advice on whether nearby footings need inspection
- Investigation report with findings and likely cause
- Remedial details and specification
- Inspection report after repair
What to send us
- Access to the plant room and equipment pad
- Water level records or water bills
- Pool age, construction type and any drawings
- Photos of cracks or damage
- Recent work on the pool or nearby
Standards and regulations that usually apply
Which documents govern a design depends on the project. These are the ones most often relevant here; we confirm the applicable editions for each job.
- AS 3600
- Design and construction of reinforced and prestressed concrete structures and members.
- AS 3735
- Concrete structures that retain liquid, covering crack control, cover and watertightness.
Questions we are asked
How do I know if my pool is leaking or just evaporating?
The bucket test is a simple start. A bucket of pool water on a step loses water only by evaporation, so a pool losing noticeably more than the bucket is likely leaking. Running the test with the pump on and off helps show whether pipework is the source.
Can a leaking pool damage my house?
It can, if water escapes into reactive clay near the house footings and causes the ground to swell or soften. That is why a leak investigation also looks at nearby structures.
Do you repair the leak?
We find the cause and design the repair. A pool builder or specialist contractor carries out the work, and we can inspect it once complete.
Need pool leak investigation?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
